CS-26.png
Images are representations only.

Type CS-26/RS/U Fuel Level Probe

Brand: Aplisens S.A.
Request Information
Favorite

The CS-26 Fuel level probe is used to measure fuel level in the tanks of motor vehicles, working machines and locomotives. The probes have been officially approved by the Ministry of Transport. 

The measurement of fuel level with the CS-26 probe is performed with the use of a simple relation between the height of liquid column and the produced hydrostatic pressure. 

The probe is composed of two parts: the sensing element, placed inside a steel rod, and the electronic element, located inside aluminum housing which can be sealed. 

The measuring element is a piezoresistive sensor, separated from the medium by a separating membrane. Pressure measuring is performed at the membrane of the submerged probe (5 mm above tank bottom). 

Depending on the type of tank (pressurized or non-pressurized tank), pressure measuring is related either to atmospheric pressure or pressure inside the tank.
Features
  • Measuring range 0 to 800 mm H2O
  • Ministry of Transport Type Approval

View Details

Specifications

Brand

Measuring Range

  • 0 to 800 mmH₂O
  • Special Version 0 to 200/2,000 mmH₂O

Pipe Length L in Tank

  • 800 mm
  • Special Version 200 to 2,000 mm

Maximum Overload

  • ≤ 100 kPa

Basic Error

  • ≤ 0.16 %

Hysteresis, Replicability

  • ≤ 0.05 %

Long-Term Stability

  • ≤ 0.1 % for Two Years

Operating Temperature

  • -25° to 80° C

Compensation Temperature

  • -25° to 40° C

Output Signal

  • 0-10 V, 0-5 V, 0-4.5 V, 0-2.5 V, 100-3,800 Bit

Power Supply

  • 8-36 V
  • 12-36 V
  • 3.3 ± 0.1 V
  • 6.0-36 V

Environmental Protection

  • IP68

Documentation

Certifications

show more