ProScan2 80GHz Radar Level Sensor

Brand: Icon Process Control

The ProScan2 Series 80GHz radar level transmitter measures the liquid level inside the tank or sump by using a PTFE Teflon® or 316SS antenna that emits low energy radar pulses.

The pulses are laser focused with a much smaller diameter than lower frequency radar sensors. 

The concentrated beam offers more reliable accuracy in conditions that involve vapor or out-gassing or low reflective media.

The small dead zone and narrow beam angle allow for use in both small and tall vessels.

These pulses are reflected off the liquid surface, and referenced to known laws of physics (speed of light). This is referred to as the Time of Flight. Distance = (Speed of Light x Time Delay) / 2.

The ProScan2 Series liquid level sensor does not contact the process liquid and therefore is an excellent choice for applications that involve corrosive, coating, dirty, or crystallising media.

The are temperature compensated over the entire range (-40-260°F) and can be used on to measure liquid under pressure or vacuum.

The ProScan2 Series radar level sensor utilizes microprocessor technology coupled with mapping software that allows it to be used where other non-contact level sensing products are unreliable, fail or go lost.
Features
  • Corrosion Resistant Plastic Design
  • Small Dead Band
  • PTFE | 316 SS Antenna
  • Narrow Beam Angle
  • Suitable for Vacuum |  Fumes
  • Simple Configuration
  • IP67 Housing
  • Epoxy Coated Enclosure
  • 4 - 20 mA Loop Powered | 2 Wire

Models matching criteria: 2
ProScan2 80GHz Radar Level Sensor view more
  • Material: Teflon® NPT
  • Output: 4 - 20 mA
In Stock
Does not ship to OH, United States
ProScan2 80GHz Radar Level Sensor view more
  • Material: 316 Stainless Steel
  • Output: 4 - 20 mA
In Stock
Does not ship to OH, United States

Specifications

Working Frequency

  • 80 GHz

Range

  • 0-34' | 0-10 m

Repeatability

  • ± 3 mm | 0.11”

Resolution

  • 1 mm | 0.04”

Beam Angle

Response Rate

  • 1.1 sec

Accuracy

  • > 0.1 % 4 mm (0.16”)

Temperature

  • PTFE: -40° C - 130° C
  • 316 Stainless Steel: -40° C - 266° C

Output Signal

  • 4-20 mA | Hart

Vacuum | Pressure

  • -14.5 Hg | -362 psi

Power Supply

  • 24 Vdc 2-Wire Loop Powered

Connection

  • 2” NPT | 150 lb ANSI Flange

Communication

  • 4-20 mA | RS-485

Dimensions

  • 96 x 48 x 98 mm

Enclosure Rating

  • NEMA 4X | IP67

Enclosure-Material

  • GFPP

Documentation

show more