Images are representations only.
ProScan Radar Level Sensor
Brand: Icon Process ControlThe ProScan Radar Level Sensor measures the liquid level inside a tank or sump by using a completely PTFE Teflon antenna or horn that sends and receives low energy radar pulses.
The sensor is mounted to the top of the tank and the pulsed signal is reflected off the liquid surface, the echo (returned signal) is then picked up or received by the transmitters antenna.
The time it takes is compared to known laws of physics (speed of light), once this is done the distance can be determined, and very accurately measured.
The ProScan radar level transmitter does not contact the process liquid and therefore is an excellent choice for applications that may be corrosive, coating, dirty, or crystallizing.
The are temperature compensated over the entire range (-40-260°F) and can be used to measure liquid under pressure or in a vacuum.
The ProScan Series is both reliable and accurate; there is no requirement for re-calibration, and virtually zero maintenance as there are no moving parts.
The ProScan utilizes a special microprocessor technology and mapping software that allows it to be used where other non-contact level sensing products fail or go lost i.e. Ultrasonics on Foam, Vapor, Condensate or Turbulence.
Features- PTFE Teflon Antenna (Horn)
- Low Profile
- Simple Programming
- Suitable for Foam | Vapor
- IP67 Housing
- Epoxy Coated
- 4-20 mA Loop Power
Specifications
Brand
General
- Operating Range: 0.3 to 33 ft (0.1 to 10 m), Consult Factory for other ranges
- Working Frequency: 26 GHz
- Resolution: ± 1 mm (0.04”)
- Repeatability: ± 3 mm (0.11”)
- Sampling: 55 sec
- Response Time: 1.1 sec
- Display: 4 Digits LCD | 4-20 mA Loop Powered
- Enclosure Rating: NEMA 4X | IP67
Materials
- Sensor Body: PTFE Teflon
- O-Rings: FKM (Standard) | EPDM | FFKM
- Housing: ABS | PolyCarbonate
Electrical
- Frequency: 26 GHz | 15 Hz per ft/s Nominal
- Supply Voltage: 9 to 36 Vdc ± 10 % regulated
- Supply Current: < 1.5 mA @ 3.3 to 6 Vdc | < 20 mA @ 6 to 24 Vdc
Operating Temperature
- PTFE: -40° F to 266° F (-40° C to 130° C)
- ABS: 32° F to 140° F (0° C to 60° C)
Standards & Approvals
- CE
- FCC
- RoHS Compliant
