Images are representations only.
Ceramic Pressure Transducer
Brand: Xi'an UTOP Measurement Instrument Co, LtdUPC3 Ceramic Pressure Transducer is made based on advanced high temperature agglutination technology, it is designed for use in application where the pressure is created by the corrosive pressure medium.
The pressure diaphragm of this transducer is made from ceramic material. Ceramics are well known material for its high elasticity, good corrosion resistance, anti-attrition, anti-impact & vibration features.
Because of the good stability of ceramic and its thick-film resistance, this Ceramic Pressure Transducer can be operated in a higher temperature range.
At the same time, this also makes the zero & sensitivity thermal shifts over the whole operating temperature range of the transmitter is very small.
Ceramics' heat-stable characteristic and its heavy film resistance enable it to have the high operating temperature scope, and also guarantee its measuring accuracy and high stability simultaneously.
The pressure act on the ceramic diaphragm's front surface without any liquid transmission in the ceramic pressure transducer, which makes the diaphragm have small deformation.
The thick-film resistance is printed on the ceramic diaphragm's back, and is connected to build the Wheatstone electrical bridge.
Features- High measuring accuracy, high stability, high reliability
- Automatic testing, laser trimming compensation for temperature
- Small profile, light weight the weight, high frequency response
- Good ability of anti-corrosive, anti-attrition, and anti-impact
- Wide operating temperature range
Specifications
Pressure Medium
- Gas or Liquid Compatible to Stainless Steel & Ceramic
Pressure Ranges
- 0 ~ 1...200 bar
Overload Pressure
- 150 % Full Scale
Output Signal
- 2~4 mV/V
Accuracy
- 0.25 % Full Scale, 0.5 % Full Scale (Standard)
Zero Offset
- < 3 % Full Scale
Long-Term Stability
- < 0.2 % Full Scale/year
Excitation
- 5 Vdc~10 Vdc
Compensated Temperature Range
- 0° ~ 70° C
Operating Temperature Range
- -10° ~ +90° C
Storage Temperature Range
- -30° to 100° C
Temperature Coefficient of Zero
- 0.3 % Full Scale/10° C
Temperature Coefficient of Span
- 0.3 % Full Scale/10° C
Input/Output Resistance
- 10 kΩ
Insulation Resistance
- 100 MΩ @ 50 Vdc
Response Time
- ≤ 1 millisecond
Process Connection
- G1/4” or others
Electrical Connection
- Hirschmann Connector or others
Material of Wetted Part
- 1Cr18Ni9Ti
Material of Pressure Membrane
- Ceramic
Material of Housing
- 1Cr18Ni9Ti
Sealing
- Fluorine Rubber Sealing Ring
- UPC3 Ceramic Pressure Transducer is Designed for Use in Most Industrial Application, and it is suitable for Contacting Most Pressure Medium (including Corrosive Medium) directly
